Apr
15
2013
26

A Functional 3D Printed Stepper Motor

stepper small 1

stepper-small-1There have been many cool things 3D printed, even automatic rifles. So what makes this special? Not to imply a functional 3D printed motor isnt awesome enough. But also, picture machines that can copy themselves, and make its own spare parts. This is a step towards just that.

Most 3D printers use stepper motors to control the movement of the extruder head. If you could actually print those motors it would be one more big step toward self-replicating hardware. Now obviously [Chris Hawkins’] working 3d printed stepper motor wasn’t built 100% through 3D printing, but the majority of the parts were. All that he had to add was the electronic driver pieces, magnets, wire, and a few nails.

Here is some more technical info:

The coils are made up of nails wrapped in magnet wire. The rotor is a 3D printed framework which accepts neodymium rare earth magnets. The axle is pointed which reduces the friction where it meets the cone-shaped support on either side of the frame. The IC on the upper right is a transistor array that facilitates switching the 20V driving the coils. The board on the lower right is a Digispark, which is an ATtiny85 breakout board that includes a USB edge connector for programming and a linear regulator which is how he gets away with feeding 20V as the source.

Below is video of it in action.


Source